3
Fig.3
Fig.4
You may have to trim the Tank Straps.
4. Attach the Frame Straps to the Frame in Front and Rear. Thread the RAW/CUT end of the straps
around a frame member and through the Rectangle Buckle, pull tight. Fig.5 & Fig.6
Fig.5
Fig.6
**Guideline**Mount The Frame Straps around a frame member at the front of the bike, ie. The Frame, a
motor mount, crash guard etc. The Rear Strap can go around the frame down tube, or a crash guard. ****
5. Thread through the male buckles and clip to the mount. Fig.6
6. Repeat for the rest of the Frame Straps.
7. Position the Mounts where you want them, You can adjust the Up/Down and the Front/Back.
Attaching the Rolie Bags to the Mounts.
8.Run the Webbing from the Rolie Bag to the Rectangle on the patch, thread from inside to out side. Fig.7
Top Webbing
Fig.8 Bottom Webbing
