Wolfman Rolie Small Basic Mounting Manuallines Download Page 1

Page: 1 / 3

Wolfman

Basic mounting guidelines for the Small and Medium Rolie Bag to

the rear of a seat.

For KTM EXC/XCW Models

Rolie Bag mounted correctly to rear of seat of a KTM 530 XCW. Fig. 1

The Small and Medium kit contains:

1-Bag,
2-Seat Straps with loop sewn in center and 4 flappy strap keepers attached
1-Protective Pad (attached to back of bag). Fig 2

****Please read and understand these instructions before touching your bike, rack or wrench.****

Mounting.

1. Remove Seat. Consult your owners/shop manual for this procedure.
2. Clean Rear Fender section. Make sure it is free and clear of Dirt and oil.

3. Peel and stick one of  the Hook strips to the rear fender below the molding mark.  Fig. 3. Press firmly
for best results. Trim if needed.

Summary of Contents for Rolie Small

Page 2: ...r and KTM Description Number Plate Carrier You will need to losen the two 8mm bolts to thread the webbing through Fig 5 Fig 5 7 Place bag on seat with handle loop facing rear of bike Thread straps through buckles on Buckle patch and tighten Snug Place the excess webbing through the Flappy Strap Keepers Mounted correctly is should look like Fig 1 HINT ...

Page 3: ...bbing lifting the buckle while pushing on the webbing before the buckle Fig 1 Fig 1 Fig 2 2 Bring the loose end down tightening as you go Fig 2 3 Do this until the bag is very snug 4 Put the loose ends of the webbing through the Flappy Strap Keepers If you have any questions or need assistance please call us at 800 535 8131 Or email us at info wolfmanluggage com Happy Riding ...