4
F. Attaching Center Bag.
There are (6) 2” D-‐Rings on the top of the B-‐Base. This is a Great platform to attach all types of Rolies.
When threading webbing through the 2” D-‐Rings there is no need to take off the Strap Keepers.
1. Thread the Webbing through the 2” D-‐Rings on the Top of the B-‐Base. Fig.11 Front & Fig.12 Rear
Fig.11
Fig.12
**A few reminders:
***Re-‐check and Tighten All Webbing Securely.
***The Correctly Mounted Kit should look like the Complete Un-‐Rack B-‐Base Kit on Page 1.
***When Using 303 Rolies, simply Remove liner to Un-‐Load. To Load, Fill Liner about halfway before inserting into
outer bag, then fill the rest of the way. Tuck liner in, roll top snug. ***
HINT
***
For Best Results use the Ratchet Method of Tightening webbing.
*******************
Most of us just grab and pull webbing to tighten it. This can lead to broken buckles. But there is an easier way.
1. Pull Up on the loose end of webbing lifting the buckle. Fig.1
Fig.1
Fig.2
2. Bring the loose end down tightening as you go. Fig.2
3. Do this until the bag is very snug.
*************************************************************************************
If you have any questions or need assistance please call us at: 800/535-‐8131 Or email us at [email protected]
Happy Riding. Woof!e
