Fitting the Continuous
Flow Attachment
(Sold separately)
11
Place the motor base facing you on a dry,
level surface.
2
2
Place the processing bowl onto the motor
base, the bowl will only sit correctly on the
base when the handle is positioned to
the right.
3
3
Rotate the handle clockwise to lock as
indicated by the graphics on the left side
of the motorbase.
4
4
Fit the spindle onto the drive shaft.
5
5
Fit the ejector disc over the spindle.
6
6
Fit the required disc for processing above
the ejector disc on the spindle.
7
7
Position the lid onto the processing
bowl, ensuring that the lid locks into place,
following lock directions on lid.
8
8
Fit the Food Collector underneath the
processing bowl chute. The Food
Collector should fit alongside the food
processor and the opening of bowl should
be in line with the chute. See figure 1 for
the properly assembled unit.
Before Using the Continuous Flow Attachment
Wash the processing bowl with chute, ejector disc and food collector in
warm water using a mild detergent. dry each part thoroughly before use.
Before you assemble your Food Processor, ensure that the power cord
is unplugged.
4
3
figure 1
Know Your Continuous Flow
Attachment
Processing Bowl with Chute
Specially designed to encourage processed
food to be guided into the food collector.
Designed for minimal mess as this chute fits
together with the food collector.
Food Collector
Uniquely designed to fit underneath
processing bowl with chute for effortless, no
mess food collection. Holds large quanitities of
food, ensuring continuous processing with
no interruption.
Ejector Disc
This disc features specially designed ribs to
direct food from the processing bowl to the
food collector.
FG_ContFeedAttachmentmanual 6/13/06 3:36 PM Page 5
