14
15
User Interface (Cont.)
Cup/Carafe & Volume Selection
Choose between Cup and carafe dispense,
selecting either displays the appropriate
symbol on the screen. (See Fig. 5)
The last volume selected for the mode will
be displayed in the centre of the icon, this
will flash to show that it can be changed;
the volume can be adjusted by using the up
and down arrows on the right of the screen.
Note:
In cup mode the volume can be
adjusted: 8, 10 or 12oz; while in carafe mode
the volume can be adjusted: 4, 6,8,10 or 12
cups (1 cup is equivalent to 5oz).
1
2
Strength Select
The strength can be adjusted for each
dispense volume independently. Once
you have tuned the appliance to suit
your taste it is unlikely that this will be
changed. The last setting is remembered
and stored for future use.
Depress the “Coffee strength” button;
the bars between mild and bold on the
screen will flash to indicate they can be
changed.
The strength can be adjusted by using
the up and down arrows on the right
of the screen. There are four strength
settings: Mild, Medium, Bold and Extra
Bold. (See Fig. 7)
Note:
The strength is controlled by
adjusting the quantity of water passing
through the coffee grinds. The higher
the strength setting the more water
that passes over the grinds and the less
water through bypass. There are separate
controls for each volume setting as the
optimised setting for a single cup is
unlikely to be the same as for a 12 cup
carafe (especially if you use single pods
in place of loose grinds).
1
2
3
User Interface (Cont.)
To select KEEP WARM depress the keep
warm button; when selected “Keep
warm” will be displayed on the screen.
(See Fig. 8)
Keep warm can be selected at anytime
whilst the display is active or while the
appliance is brewing/dispensing.
Keep warm switches on at the end of the
brew cycle and remains on for a period of
2 hours.
While keep warm is active and the
keeping warm plate is hot, “Keep warm”
will flash on the screen and the LED
behind the START/STOP button will flash
red.
At the end of the 2 hours the appliance
switches off and the keep warm setting is
no longer displayed.
Note:
Keep warm is optional and only
works while the appliance is in Carafe
mode and has to be selected every time
that it is desired.
1
2
3
4
5
Keep Warm
Sound feedback is used to provide the user with feedback on the
water heating and brewing progress
All audible signals sound a beep or multiple beeps.
Whenever the START/STOP button is depressed this is accompanied
by a single beep.
At the end of the water dispense or brew cycle but before keep
warm (if selected) there is a double beep to provide feedback to the
user that the coffee or water is ready for use.
1
2
3
4
Sound Feedback
Figure 8
Figure 5
Carafe Mode
Figure 5
Cup Mode
Mild
Medium
Bold
Extra
Bold
Figure 7
