Operating Instructions
Firewood Conveyor
- 26 -
1. Position the firewood conveyor where you wish to unload firewood on level ground.
2. Adjust the wood chip deflector and chute on the discharge end of the conveyor as needed.
3. If you wish to use the rotating wheel hub feature, remove the locking bolt and nut on the pivot
bracket, pivot the wheel(s) and reinstall the locking bolt & nut.
4. The single hydraulic valve located on the wheel axle between the hydraulic lift cylinders is for flow
control of the hydraulic system and regulates the speed at which the conveyor chain operates.
5. The twin hydraulic valves located next to the (engine side) right wheel control the rotation direction
of the conveyor chain and the height of the conveyor discharge.
The front valve (closest to the engine) controls the forward and reverse function of the chain.
The rear valve raises and lowers the conveyor discharge.
6.Position log splitter over the conveyor feed hopper.
7. Fill the gas tank with fuel.
8. Start the gas engine & adjust engine speed (see Honda Engine Owners Manual).
9. Adjust the height of the conveyor discharge & engage the front directional hydraulic lever.
NEVER
wear loose clothing or jewelry that can be caught by moving parts of this
firewood conveyor. Keep clothing and hair away from all moving parts when operat-
ing this firewood conveyor.
DANGER!
Do not operate this unit indoors or in an enclosed area or carbon monoxide
poisoning will occur. Failure to follow this will result in serious injury or death.
WARNING!
Do not set up the firewood conveyor on ground with more than a 10 degree incline.
Summary of Contents for 28HDI
Page 48: ......
