5
Parts and Features
1.
Emulsion Cap Assembly: The two-piece cap has a filler cap inside an emulsion cup.
The filler cap has markings for easy measuring, while the emulsion cup is used to
make fine dressings and marinades. When both parts are removed, ingredients can be
added or the tamper may be inserted into the lid.
2.
Lid: The lid fits securely into blender jar and can be easily removed by lifting the logo
tab. To keep the spout of the pitcher mess-free, place logo tab above the handle of the
pitcher.
3.
Blender Jar: The durable jar is clearly marked with ounces, cups, and milliliters. Your
jar was made of a special co-polyester material selected for its weight, durability, and
glass-like clarity. For care and cleaning of the jar, see page 8. Only use the blender jar
on the Wolf Gourmet Blender.
4.
Cutting Blade Assembly: The cutting blade assembly is permanently installed in the
blender jar.
Preparing the Blender Jar
After unpacking, wash in hot, soapy water.
Dry thoroughly. Care should be taken when
handling cutting blade assembly since it is
very sharp. Refer to care recommendations
on page 8.
IMPORTANT:
Blender jar and cutting
blade assembly are subject to wear
during normal use. Always inspect jar for
nicks, chips, or cracks. Always inspect
cutting blade assembly for broken,
cracked, or loose blades. If jar or cutting
blade assembly is damaged, do not use.
Call our customer care center to obtain
replacement parts.
WARNING
Burn Hazard
Metal parts under blending jar get hot after
use. Do not touch.
WARNING
Burn Hazard
When blending hot liquids, avoid contact with spray or steam by:
•
Always removing Emulsion Cap Assembly.
•
Always beginning blending on the lowest speed.
•
Never exceeding the 2-cup (473-ml) level.
•
Always keeping hands and other exposed skin away from the lid opening.