3062438_0309
4
Standards / Regulations
- According to DIN EN 50110-1, only qualified electricians may
carry out the installation and commissioning of the heating control
unit and connected accessories.
- Observe all regulations stipulated by your local power supply
utility and all VDE or local regulations.
- DIN VDE 0100 regulations regarding the installation of high
voltage systems up to 1 000 V.
- DIN VDE 0105-100 operation of electrical systems.
Installation /
Commissioning
Warnings
- Never remove, bypass or disable safety and monitoring
equipment.
- Only operate the system in perfect technical condition.
Immediately remove / remedy any faults and damage that may
impact on safety.
- Always ensure that cold water is mixed in with hot water, when
the DHW temperature is set above 60 °C (risk of scalding).
Maintenance / Repair
- Regularly check the perfect function of all electrical
equipment.
- Only qualified personnel may remove faults or repair damage.
- Only replace faulty components or equipment with original Wolf
spare parts.
- Always maintain specified electrical protection values (see
specification).
Any damage or loss resulting from technical modifications to Wolf
control units is excluded from our warranty.
Note
The appliance and control accessories comply with the following
regulations:
EC Directives
- 2006/95/EC Low Voltage Directive
- 2004/108/EC EMC Directive
EN Standards
- EN 60730-1
- EN 55014-2
- EN 60529
Standards / Directives
