Page 16
Theory of Operation
MW24-1100 MICROWAVE OVEN
3-11
#814888 - Revision A - May, 2009
MODES OF OPERATION AND FEATURES
This portion of the manual explains the input key strokes performed at
the touch control panel in order to begin, use and end different modes of
operation and to enable specific features of the microwave oven. For
more detailed information on any of the following articles, refer to the
complete Microwave Oven Use and Care Guide, supplied with the unit.
Start-up Mode
When power is initially supplied to the unit, “
WELCOME - PRESS
CLEAR - AND - PRESS CLOCK
” will flash on the digital display
. At this time, press the STOP/CLEAR key and “
:
“ will
The unit is now ready for use
and the first input operation suggested is setting the clock.
NOTE:
If power to the microwave oven is interrupted, the unit will auto-
matically enter Start-up Mode.
Clock Set Mode
To set the correct time on the clock, follow the steps below:
1.
Press the TIMER/CLOCK key and “
TO SET - KITCHEN TIMER -
PRESS 1 - TO SET CLOCK - PRESS 2
” will flash on the digital
2
Press the number 2 key and “
enTer - time of day
will flash on the
digital display
3.
Enter the time of day by
pressing the numbers in
sequence. For example:
If setting the time of 1:30,
press the number 1 key,
then the number 3 key,
then the number 0 key and
the display will flash “
1:30 -
PRESS CLOCK
NOTE:
It is not possible to
designate AM or PM.
4.
After the correct time of
day is entered, press the
TIMER/CLOCK key again
to exit Clock Set Mode
NOTE:
If a mistake is made
while setting the correct time,
press the STOP/CLEAR key to
start over.
1
2
3
Figure 3-15.
Start-up Mode
Initiated When
Unit Plugged In
Figure 3-16.
Press
STOP/CLEAR
key to end
Start-up Mode
Figure 3-20.
Press
Time/Clock Key
Figure 3-17.
Press
Time/Clock Key
Figure 3-18.
Press Number 2
Key
Figure 3-19.
Enter Time of
Day