7
From channel select mode, press and hold the OK button
to display info about the connected device. The Qr HUBB
will cycle between display of the RF signal strength, and
the connected device’s battery level until the OK button is
released.
CHANNEL INFO
Good signal
OK signal
Bad signal
DEVICE OPTION TOGGLE
When communicating, the Channel LED and the Device
Option LED flash to indicate the channel selected, and the
state that is sending. When communication is completed,
the QR will go back to channel select mode, and indicate
the new state of the Device Option Toggle with a green or
red colour.
From the channel select mode, double press the button
to toggle the paired device’s ‘Device Option’ The effect of
this toggle depends on what type of device is paired to
that channel. Below is a generalisation of products and the
associated effect.
Device Type
Effect
Bite Alarms
Toggle IQ Port On / Off
Light Devices
Toggle the Main Light On / Off
Motion Sensors
Toggle the device between Standby and
Active
Good battery
level
OK battery
level
Bad battery
level
