8
4 Colours: Blue - Yellow - Green -
Red - Stealth Mode (Off)
ADJUSTMENT OF BITE ALARM
CONTROLS FROM HUBB
DEVICE MENU
When the HUBB has been paired with Alarms press the
corresponding Alarm channel to change any settings. Press
and hold channel button until
‘Device Menu’
is shown on
screen.
On activation of the bite Alarm the
tone is replicated on the HUBB
and the HUBB LED’s replicate the
alert colour shown on the bite
Alarm. Depending on the HUBB’s
settings, the HUBB will also vibrate
on alert.
When
‘Device Menu’
is shown, use OK button to enter sub
menu.
Go to
‘Sensitivity’
to adjust the connected bite Alarm line
sensitivity. When confirming this option a message will be
sent to the bite Alarm, if successful you will be notified on
screen.
ROLLER SENSITIVITY SETTING LEVELS
8 Sensitivity Levels, expandable to
16 via HUBB Link
2mm, 6mm, 12mm, 18mm, 25mm,
35mm, 60mm or 100mm.
Additional Sensitivity Levels
4mm, 8mm, 16mm, 20mm,
30mm, 40mm, 80mm or 300mm.
LED ILLUMINATION COLOURS
BITE LED BRIGHTNESS
ADVANCED MENU
ALERT TIMEOUT
Go to
‘Alert Colour’
to change the
colour used to display alerts on
the bite Alarm and HUBB.
Go to
‘LED Brightness’
to change
the brightness of the LED’s
displayed on the bite Alarm.
Go to
‘Alert Timeout’
to adjust the
time that the LED remains turned
on after an alert on the bite
Alarm.
60 seconds / 30 seconds / 20
seconds / 10 seconds /
5 seconds
Use the back button to leave
‘Device Menu’
and go
‘Advanced
Menu’
and use OK button to enter
this menu.
< Device Menu >
[Enter]
< Sensitivity >
12 mm
<
Alert Colour
>
Blue
< LED Brightness>
7 3 %
< Advanced Menu >
[Enter]
< Alert Timeout >
30 secs
