11
D U A L - S T A C K E D B U R N E R A S S E M B LY
The unique dual-stacked burner design of your
gas cooktop combines all of the burner parts in
one assembly.
After cleaning or removing burner parts for
any reason, it is extremely important that you
reassemble burners correctly.
The burner cap has a groove in the bottom,
which allows the cap to fall into place when
moved around the top of the burner. The cap
should be flat relative to the burner when in
the proper orientation. Failure to do this will
result in a poor flame. Refer to the illustration
below.
S U R FA C E
B U R N E R S
A spark electrode ignites each surface burner.
This control eliminates the need for continuous
open flame pilots. For added safety and
convenience, each burner is designed with an
electronic reignition system. This feature
enables any burner to relight automatically in
the event it is accidentally extinguished.
A distinguishing feature of Wolf’s low kW
control is its constant, low heat output without
continuous ignitions. The flame diameter
remains full size; only the heat output is
lowered. This patented dual-stacked burner
design makes it possible to enjoy cooking at
full flame as well as maintain control while
simmering at the lowest flame setting.
W O L F
G A S C O O K TO P
U S E & C A R E
Burner Cap
Igniter
Sealed Burner
Dual-stacked burner assembly
Failure to position the burner parts
correctly could cause flames or gas to
escape, causing heat damage to your
cooktop, or burn between parts, resulting
in poor combustion.
