Wolf CT15I, Technical & Service Manual

Page: 46 / 62

Induction Cooktop
Troubleshooting Guide
5-8
Error
Priority
Displayed
Error #
Error
Condition
Notes Possible Source(s) of Failure
2 E30 Generator 1:
Burner
(F,FR,FC) ‘ON
LED’ Failure Effected burner is not available. LED board failure.
Action : Perform the LED test #1
and if all LEDs work reset error.
Action : If one of the LEDs fails
to illuminate change the Glass
Assy.
2 E31 Generator 1:
Burner
(R,RR,RC) ‘ON
LED’ Failure
2 E32 Generator 2:
Burner (RL)
‘ON LED’
Failure
2 E33 Generator 2:
Burner (FL)
‘ON LED’
Failure
2 E34 Generator 3:
Burner (RR)
‘ON LED’
Failure
2 E40 Generator 1:
Burner
(R,RR,RC)
sensor shorted. The effected burner will shutdown. Induction generator failure.
Action : Change affected
generator board.
2 E41 Generator 2:
Burner (RL)
sensor shorted.
2 E42 Generator 3:
Burner (RR)
sensor shorted.
2 E43 Generator 1:
Burner
(R,RR,RC)
sensor open. The effected burner will shutdown. Induction generator failure.
Action : Change affected
generator board.
2 E44 Generator 2:
Burner (RL)
sensor open.
2 E45 Generator 3:
Burner (RR)
sensor open.
2 E50 Generator 1:
Open heat sink
thermistor. The effected burner will shutdown. 1. Induction generator failure.
Action : Perform Heatsink test
#4 and if all appear ok reset the
error and test operation
2. If error returns.
Action : Change affected
generator board
2 E51 Generator 2:
Open heat sink
thermistor.
2 E52 Generator 3:
Open heat sink
thermistor.