Planning Information
New Integrated Electric Cooktop
M O D E L C T 1 5 E / S
Dimensions in parentheses are in
millimeters unless otherwise specified.
5
I N S T A L L A T I O N N O T E S
Refer to the illustrations and specifications
for overall dimensions, cut-out dimensions and
installation specifics.
Wolf recommends using 33" (838) wide
cabinets for installation of two integrated
modules side by side. An 18" (457) wide
cabinet is recommended for installation of a
single integrated cooktop module.
IMPORTANT NOTE:
Review specific installation
instructions for product to product capabilities
If the integrated electric cooktop is to be
used with any combination of additional
cooktop units or modules with a filler strip, the
cut-out width increases to 14" (356). When
multiple cooktops or modules are installed side
by side, refer to the countertop cut-out dimen-
sions on page 6.
A Wolf downdraft system, Cooktop or
Pro ventilation hood is recommended. When
installing a ventilation hood, refer to the specific
requirements of the hood for the minimum
dimension to countertop. Also refer to the
ventilation recommendation charts in the
cooktop or Pro ventilation sections of our
website, wolfappliance.com.
The Wolf integrated electric cooktop requires
a separate, grounded 3-wire 240/208 V AC,
60 Hz, 20 amp service with its own circuit
breaker. It has a 4' (1.2 m) flexible 3-wire
conduit for connection at the electrical supply.
Locate electrical within the shaded area shown
in the illustration on page 4.
You must follow all National Electrical Code
regulations. In addition, be aware of local codes
and ordinances when installing your service.
Refer to the installation instructions
shipped with each Wolf product for detailed
specifications.
This cooktop is intended for indoor use only.
