Cooktop Low-Profile Hood Installation
13
wolfappliance.com/specs
SLOT
5
15/16
"
(151)
5
15/16
"
(151)
Illus 13.
Illus. 14
ELECTRICAL
PLATE
Island Hoods—Ducted Installation
Locate the electrical supply through the wall within the
shaded area shown in the illustration on page 7. Install
ductwork as outlined on pages 8–9.
Mount the bottom panel to the hood. Attach with the four
screws provided on the hinge side of the panel. Refer to
illus 12 below.
MOUNT HOOD TO CEILING
Using the drilling template, drill holes for attaching the
mounting bracket to the ceiling on the vertical side of your
hood. The center line of the mounting bracket is in line
with the center of the control panel.
IMPORTANT NOTE:
Placement of the mounting bracket is
critical for proper alignment of the hood with the cooktop.
Attach the mounting bracket to the ceiling using the
screws and anchors provided. Refer to illus 13 below. The
position of the bracket determines the final position of the
hood. The side with the slot corresponds to the side
opposite the controls.
Assemble the plate of the electrical system fixing it with
two screws and washers as shown in illus 14.
BOTTOM PANEL
HINGE
Illus 12.
