I
N S T A L L A T I O N
I
N S T R U C T I O N S
•
Align side trim and top trim in
upper corner. Insert color coordinated
screw through trim hole. Verify that
your screw will hold both pieces of
trim – side trim and top trim.
•
Continue installation of trim to
next corner. Align side trim and top
trim in corner. Insert color coordinat-
ed screw through trim hole. Verify
that your screw holds both pieces of
trim – side trim and top trim.
•
Proceed to bottom trim installation.
Align side trim and bottom trim in
corner. Insert color coordinated screw
through trim hole. Verify that your
screw holds both pieces of trim – side
trim and bottom trim. Continue to
remaining corner.
•
Once all corners have been
installed. Screw in remaining screws,
one along bottom edge of top trim
and the other along top edge of bot-
tom trim. This will keep your trim
secure and prevent sagging or
damage.
STEP TWO –
Installing Front Panel to Drawer
Front:
•
Slide top lip of front panel over
Warming Drawer door front.
•
Insert three (3) screws in top of
front panel lip through door frame
assembly. Use screwdriver to tighten
screws.
•
Insert three (3) screws in bottom of
front panel through door frame
assembly. Use screwdriver to tighten
screws.
STEP ONE –
Installing Wolf Handle to Front
Panel:
•
Remove all packaging materials sur-
rounding the front panel, handle
assembly and trim kit.
•
Gently remove the protective cov-
ering from the stainless steel front
panel or integrated front panel. The
adhesive protective covering should
peel away from the surface cleanly,
but if some residue remains clean sur-
face with a mild detergent.
•
Lay front panel on its back surface.
•
Line up handle assembly and stand-
offs. Insert handle screws through
holes on front panel. Tighten handle
assembly screws to front panel.
Warming drawer handle and front panel
installation
Warming drawer trim installation
STEP THREE –
Installing Wolf Trim to Warming
Drawer Front:
•
Align side trim and warming draw-
er front plate. Verify hole location
from trim corresponds to pre-drilled
hole location on warming drawer
front plate.
•
Drill through template holes pro-
vided on front plate through cabinet.
Wolf Appliance Company, LLC
•
P.O. Box 44848
•
Madison, WI 53744
•
800-332-9513
•
www.wolfappliance.com
1/02
