background image

Instruction Manual HT50 / 12

8. Maintenance

Before and after each use, check the product and accessories for wear and damage.  If required, exchange 
them for new ons.  For further assistance, contact Wolf Creek on 0151 548 5500.  Parts and accessories can 
be purchased from www.wolfcreektools.co.uk

9. Warranty

Wolf Creek ensure the replacement of all defective parts by a fault or a manufacturing defect for a period of 12 
months from purchase date.  In no event shall the warranty give rise to a refund of the equipment for any direct 
or indirect misuse of the machine than that of its intended purpose.

Wolf Creek accepts no liability for any damaged caused to persons or property from using this machine.

The warranty does not cover:

Abnormal or improper use of the pole hedge trimmer
Lack of maintenance
Lack of lubrication
Using the pole hedge trimmer for commercial or rental purposes
Installation, adjustment and commissioning of the pole hedge trimmer
Damage or loss occured during transportation or movement
Damage due to shock or fall
Shipping and packaging material
Wear and tear items (i.e. hedge trimmer blades, etc.)









The warranty will be invalidated if:

Changes are made to the machine without permission of Wolf Creek
Pole hedge trimmer is misused, not in accordance with the instructions and/or regulations
Use of parts not being original or approved by Wolf Creek



Summary of Contents for HT50














Reviews: