3. Power Saving Modes and Lock Screen.
• Press the “POWER” key shortly after starting up, system enter to power save and lock
mode.
• Press the “POWER” key or tap the touch screen, system will return to bright in 1 second
• The primary operation of the device will not stop under the power save mode, only the
LCD is disabled.
For example: playing music, movie, etc
• Switch OFF: When the device is OFF, press and hold the “POWER” key for 3 seconds,
the screen will display the power OFF interface, choose the power OFF item to confirm, the
system will shut automatically
Note:
When the device's battery is low, it will alarm continuously until it shutdown automatically
without charging. If the device can not start up please check if the battery is low, and try turning
it on again after the battery is charged.
4. Battery management and charging
.
• Make sure the battery is fully charged before use.
• Insert the micro port of the battery adaptor into DC slot of the device, and connect the
other side to the power socket.
Then the desktop icon of the battery indicates it is in charging mode. Wait until the
battery is fully-charged,
Don’t disconnect the power when charging. Once the battery is fully charged, the Icon on
the desktop will stop rolling.
Note:
In order to keep the battery working in the best condition, do the following:
• Don’t charge the power in high temperature.
• No need to drain the power for this Li- battery. You can charge the power even if there is
still some power in the battery.
• In order to keep the battery in good condition, make sure to charge the device once every
two weeks if you don’t use this device for a long time.
7
