8 21 71 4 :
RM -4 29 0W S e ri e s Us e r G u id e
© 2 01 3 Woh le r Te ch no lo g ie s, Inc . A ll ri g ht s re s e r v ed .
8
R M - 42 9 0 W S e r i e s U s e r G u i d e
F r o nt P a n el C o n t r o l s
•
Speakers:
Audio may selected for monitoring through the left and
right speakers.
•
Headphone Jack:
Monitor the assigned left/right stereo audio
channels with stereo headphones from this mini-stereo connector.
The speakers will mute when the headphones are plugged in.
•
Power
:
Each of the four
Power
buttons turn the associated LCD
screen on and off; the LED glows green to indicate on. When the
indicator above the power switch is green then the unit is receiving
power. When the indicator is flashing, the unit is in stand-by mode.
•
In A/B
:
This button toggles the two inputs and displays the selected
one to the screen.
•
Aspect
:
This button toggles the aspect ratio between 4:3 and 16:9
for the associated LCD screen when the input signal is SD-SDI.
HD-SDI images are always 16:9 and will not be affected by the
Aspect switch. The LED glows green to indicate 16:9.
•
Scan
:
The
Scan
button toggles between the full video signal view
(underscan mode) to a typical display visible on a customer’s
monitor (normal mode).
•
User1, 2, and 3
:
The
User
buttons are programmable as hot keys
for parameter adjustments. Refer to “
” on
•
Menu
:
Pressing the Menu button displays the OSD (On-Screen
Display) menu. Refer to “
” on
more information.
•
Blue
or
∧
:
When the OSD Menu is not active, pressing this button
toggles between three settings: blue monochromatic, grey scale
Note:
The left LCD must be turned on for audio to function
from either the left or the right screen, because the
audio amplifiers are powered from the left LCD.
Therefore, if only one screen is to be used, be certain
that it is the left one.
Note:
The
In A/B
button is only available on the
RM-4290W-2HD.
Note:
The
Aspect
button is only available on the
RM-4290W-HD.
