8 21 70 4:
H D C C- 20 0A (60 8 /7 08 ) U se r G u id e
© 20 13 Wo hl e r Te c hn ol og i e s , In c . A l l r ig h ts re se rv ed .
3
RM-3270W HD Series User Guide
I n s t a l l a t i o n R e c om m e n d a t i o n s
Installation Recommendations
Mounting
The unit is designed to install into a standard 19” rack. The unit should
be mounted at approximately eye level for optimum visual
observation.
Heat Dissipation
No special physical mounting considerations are necessary regarding
heat dissipation except under adverse conditions, provided the
ambient temperature inside the mounting enclosure does not exceed
40
°C (104°F). Adjacent devices can be rack mounted (or stacked)
in proximity to the unit. If the temperature is above 40°C, allow
a 1RU (1.75”/44.45mm) space above and below the unit for air
circulation.
DC Power
Connect the unit to its external 100 to 240VAC (50 to 60Hz) to 12VDC
power supply (included).
FCC Compliance
This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
