Page
27
Table 2-16: IMD Menu Structure
IMD Menu
Parameters
Default Value
Domain Range
Description
IMD DISPLAY
ON
ON or OFF
Set whether to
enable the IMD.
IMD COLOR
RED
RED, GREEN, YELLOW,
WHITE
Set the color of
the IMD
characters.
IMD CHARACTER HDM-215-3G
(Up to 16 characters of
text for static LOCAL
display)
Set the IMD
message.
*
IMD PROTOCOL
LOCAL
LOCAL
TSL3.1, TSL4.0, TSL5.0
IMAGE VIDEO (1510
protocol)
NETWORK
Select an IMD
protocol.
IMD ID
0
0 to 255 (unit ID
number for Dynamic
IMD/Tally)
Set the ID
number for the
IMD.
IMD NAME
-
(Up to 16 characters of
text for the IMD Name)
Set the ID Name
for dynamic
IMD/Tally.
*
BAUD RATE
115200
2400, 4800, 9600,
19200, 38400, 57600,
115200
Set the BAUD
rate for RS-485
communication.
LED TALLY
ON
ON or OFF
Enable / disable
the Tally light.
OSD TALLY MODE RG
OFF, RG: Red/Green,
GR: Green only,
RGY: Red/Green/Yellow
Select the OSD
tally mode.
IMD TALLY MODE T1
T1, T2, T1T2, T2T1, T1-,
T2-, T1T2-, T2T1-
Select the IMD
tally mode for
Image Video.
TALLY SOURCE
STANDARD
STANDARD (rear Tally
connector), IMAGE
VIDEO, TSL
Select the tally
source.
* To enter the characters
for the IMD CHARACTER or IMD NAME SETTINGS,
navigate to the setting and press Enter. Press Up or Down repeatedly to locate the
first character and press Enter to move to the next character. Press Up or Down
again repeatedly to locate the second character and press Enter. Repeat this
process until all of the characters (up to 16) have been entered. Then press Menu
to exit.