Page 62
0
A Dolby bitstream may also be decoded and output through an optional AES Output
Card or an Analog I/O Card completely independently of other monitoring. Refer to
How Do I Mix Any Input(s) to Any Output(s)?
The Dolby Zoom feature allows you to view the Dolby metadata and the level
meters simultaneously while also monitoring the Dolby audio pairs in the front
panel speakers.
If a cluster contains a Dolby bitstream, then the Select Cluster hot key associated
with it (if there is one) will automatically change to a Dolby Zoom. If the bitstream
should disappear or change to PCM, then the hot key will change back to a Cluster
Select.
Note:
This automatic operation is subject to the following restrictions:
1.
This feature only applies to the AMP2-E16V (e.g., the monitor must contain a
Dolby decoder).
2.
You have selected Dolby Zoom as the Dolby decoder source in the Dolby
Configuration Menu.
3.
You selected Auto for the Decode type in the Dolby Configuration Menu.
To display the Dolby Zoom screen from the Main Screen, press a Dolby Zoom
hot key. For detailed instructions for creating a Dolby Zoom hot key, refer to
Figure 4–10: Dolby Zoom Screen
Solo
Chans
5-6
Solo
Chans
3-4
0
Bitstream Format
DD 32-bit
L
/
R
S
u
r
r
o
u
n
d
0
-60
-50
-40
-30
-10
-20
Φ
L
/
R
F
r
o
n
t
L
R
S
t
e
r
e
o
D
o
w
n
M
i
x
C
e
n
t
e
r
/
L
F
E
DD Sample Rate
kHz
Data Rate
384 kbps
Dialog Level
- 27 dBFS
Bitstream Mode
Complete Main
Coding Mode
3/2 (L, C, R, Ls, Rs)
+0
Pair 4
Scroll
SOLO
Solo
Chans
1-2
Mute
Chans
9-10
Exit
Exit
Help
Dolby Zoom
– Slot 1 (3G SDI I/O) Pair 1
Dolby E
Pgm 1
Note:
The solo and mute keys on the Dolby Zoom screen are automatically
configured to allow you to easily isolate and listen to the audio of any channel or
channels. With the twist of a knob, these hot keys can be converted from solos to
mutes. They are automatically labeled according to the Dolby metadata, as are the
meter pairs.
1.
Solo/Mute Pair 1 through 4: To Solo/Mute any of the Dolby pairs or the
downmix:
