Page 8
7.
Turn the Select Horizontal knob (or the Select Vertical knob) to select the
letter to type. Press the knob to type it.
8.
When you have finished typing the name, press Save/Exit to return to the
Cluster Configuration Screen.
9.
Repeat Steps 5 through 8 until you have named all the clusters and pairs.
10.
When you are finished, press Save/Exit repeatedly until you reach the
Main Screen.
3. Arrange the Main Screens
Depending on your needs, the Main Screen provides a number of arrangements
from which you can choose.
1.
From the Main Screen, press Menu to display the Configuration Selection
Menu.
2.
From the Configuration Selection Menu, press the Config Main Screen
knob to display the Main Screen Configuration Menu. Refer to Main
Screen Arrangements in Chapter 4 to see how the various screen
arrangements will appear.
Figure 1–8: Main Screen Configuration Menu
Main Screen Configuration Menu
Help
Configure
Meters
Configure
Loudness
Screen
Content
Left
Screen
Right
Screen
Left Nav
Button
Video
Meters
Help
Meters
Data
Help
Video/Mtrs
Left Swap
Data
Video/Data
Left Swap
Meters
Meters
Data
Help
Save / Exit
Cancel
Metadata
Select
Status
Select
Configure
Hot Keys
1 - 8
Configure
Hot Keys
9 - 16
Configure
Arbitrary
Phase
Video/Mtrs
Swap Both
Mtrs/Data
3.
When the Main Screen Configuration Menu appears, rotate the Screen
Content knob to select one of the six available arrangements for the left and
right screens (shown in
above). Rotating the knob moves the
highlight box; pressing the knob makes the selection. (In these cases, the left
navigation button becomes the SWAP button.)
Data refers to metadata, whether from:
1.
The optional Dolby D/E / DD+ card,
2.
The SMPTE 2020 metadata in an SDI stream, or
3.
The status data in an SDI stream.