Wohler AMP2-16V-M, User Manual

Page: 140 / 172

Page 133
Figure 6–20: Tighten First Standoff Screw
12. Adjust (if needed) and tighten the first standoff screw on the opposite side
of the system control board, and then attach another screw on top of the
standoff as shown in
Figure 6–20 above.
Figure 6–21: Tighten Second Standoff Screw
13. Similarly, adjust and tighten the second standoff screw on the opposite side
of the system control board, and then attach another screw on top of the
standoff as shown in Figure 6–21 above.