2-CHANNEL AUDIO MONITOR
AMP1-DA/106
Technical Specifications
Inputs
2 Analog (XLR, Male)
2 AES/EBU (BNC, Female)
Outputs
2 balanced analog output of selected input (XLR, male)
Additional rear panel controls
Termination DIP switch
Gain/calibration DIP switch
Input level for maximum output
(volume full on)
0 dBv balanced
Input overload
+26 dBv balanced
Peak acoustic output (2 feet)
98 dB SPL
Response, 6th octave
80 Hz - 16 kHz ± 7 dB
(-10 dB @ 50 Hz, 22 kHZ)
Power output
RMS each side (4
)
RMS bass (4
)
10 W transient / 5 W continuous
20 W transient / 10 W continuous
Distortion, electrical:
Less than 0.15% at any level below limit threshold
Distortion, acoustic
8% or less at worst case frequencies above 180 Hz including cabinet resonance;
typically less than 2%
Hum and noise
Better than -68 dB below full output
Magnetic shielding
< 1 Gauss any adjacent surface
Power consumption (average max)
35 W
D to A gain calibration,
(dB = dBFS)
+8 = -20, +4 = -20, +6 = -9, 0 = -18 (DIP selectable)
AES sampling rate
32 to 48 KHz, auto-select
D to A converter
24-bit low jitter
Converted analog out (S/N)
>90 dB
Converted analog out (THD)
< 0.008%
AES termination
Removable (DIP select)
Level meter type
106-segment, tri-color LED bar graph
Bar graph quantity
2 each, horizontal
LED color
Red • amber • green
Metering range
72 dB
Reference level select
0, +4, +6, or +8 dBv
Display mode select
VU only • VU/PPM • PPM only
Peak hold select
Manual, 3-sec, 10-sec, or off
PPM ballistics select
Type I • Type II • DIN 4506 • SSRT
Scale select
AES • Extended VU • Alternate AES • VU • BBC • NORDIC • DIN
