Operating
28
5.3
Charging the recharge-
able battery
The battery symbol on the top right of the display
indicates the charge status of the rechargeable
battery.
•
To charge the videoscope connect the power
pack, included in the scope of supply, to the
USB port on the bottom of the device.
Connect the power pack to the mains.
The On/Off key flashes red (Fig. 1, position 1)
while the battery is being charged.
The Wöhler VE 400 remains ready for operation
throughout the charging process.
6
Operating
6.1
Power on/off
•
To power the device on/off press and hold the
On/Off key (1) for approx. 2 seconds.
The start screen is displayed after 3 seconds,
followed immediately by the live camera image.
6.2
Freezing the image
•
To freeze an image, press the OK key.
•
To return to the normal image mode, press the
OK key again.
6.3
Rotating an image
•
To rotate an image 90° in the display, press
the arrow up key.
6.4
Probe viewing angle (Ø
5.5 mm only)
Fig. 17: Ø 5.5 mm probe Wöhler VE 400;
the arrow indicates the switch to change
the viewing angle.
•
Press the black switch on the probe connec-
tion to change the viewing angle of the probe
from 0° to 90° side view.
