Settings
75
9 Settings
Fig. 73: Settings – overview.
In the Settings menu it is possible to define general
settings as well as settings configuring the se-
quence of measurements, the report and the de-
vice. In addition, it is possible to preselect the phys-
ical units.
•
To access the Settings menu tap the gear
symbol located in the top right of the display.
NOTE!
The gear symbol is not available during the
measuring process. The settings must be made
before the multi-point test begins.
If the app is not connected to the Wöhler BC 600,
you can access the Settings menu via the
Customer management menu
(tap the gear symbol).
If the app is connected to the Wöhler BC 600, you
can access the Settings menu from within any
view.
•
To define settings, proceed as follows for the
respective configuration:
•
Tap the arrow > to access the available op-
tions.
•
Select the desired preset options and click
"OK" to confirm.
When a preset has been selected, the corre-
sponding text is displayed formatted blue in the
overview of settings
9.1 General
Your contact information
TESTER SELECTION
You can enter the information that should appear in
the test report below the TESTER.