Original instructions GMF-E
Page 8 of 32
B0834
3. Product description
The reciprocating pump is capable of accommodating up to 6 pump elements. Delivery
volume per element each is 0,08 or 0,15 cm³/stroke at maximum and can be regulated (see
description at page 3). Maximum operating pressure amounts to 350 bar. The reservoir is
made of stainless steel providing a capacity of 8 litres.
3.1 Use
The pump unit has been exclusively designed for the supply of
lubricating oils and greases up to the NLGI-class 3.
3.2 Limits of application
The range of application of the pump unit has been limited as follows:
Admissible supply pressure:
max. 350 bar
Medium:
Oil and grease up to consistency class 3
In addition, the range of application of the pump unit is determined by the medium to be
supplied. Therefore, to finally define the range of application, consult also the technical data
sheets of the medium to be used.
3.3 Environmental conditions
Operating this pump unit in aggressive atmosphere (vapour of solvents,
acids, bases, salt water mist, etc.) may cause damage, respectively
corrosion of components and consequently, failure of the equipment and
hazards due to emerging lubricant!
Ambient temperature range
Lower limit temperature:
-20 °C
Upper limit temperature with motor:
+55 °C
Relative air humidity:
max. 90%
Noise level :
<70 dB(A)
Physical environment
If the equipment is planned to be operated at a level higher than 1,000 m above sea level,
consult the manufacturer, in every case.
