Wodaplug WDS600-104GH-R220 EPON ONU, User Manual

Page: 7 / 22

WDS600-104GH-R220 EPON ONU users manual
Indicator Description
1 PWR Power status
On: The ONU is power on;
Off: The ONU is Power off;
2 CATV CATV port status
On
：
CATV optical normal
（
>-9dBm
）
Off
：
The CATV signals are not received or
low
（
<-9dBm
）
3 LANn LAN port status
On: Ethernet connection is normal but no traffic;
Blinking: Data is being transmitted through the
Ethernet port;
Off: Ethernet connection is not set up or
abnormal;
4 LOS
EPON optical
signals
On: Optical power lower than receiver
sensitivity or no optical signal;
Off: Optical in normal
5 PON ONU Register
On: Success to register to OLT;
Blinking: In process of registering to OLT;
Off: In process of registering to OLT failed or no
normal signal input;
2.4 Device Connection
 Connect the fiber: Insert the SC fiber connector into the PON connector on the rear
panel of the ONU.
 Connect the Ethernet cable: Connect the RJ-45 Ethernet cable to any LAN port and each
home device, that is, the computer, IPTV set-top box, and so on.
 Connect the AC adapter: Plug the AC / DC adapter into the AC wall jack and the ONU
12V DC power jack.
 Press power switch. The equipment can provide business services if the lights are
normal after power supply for the ONU.
7
www.wodaplug.com