WNM YE3-132S2-2H, Operation Manual

Page: 7 / 12

6
STANDARD Q/WN.624-2019
POWER RANGE 0.37~375kW
PROTECTION CLASS IP56
INSULATION CLASS F~H
DUTY S1
YE3- H Marine Rotary Motor is developed on the basis of YE3 series motor with new design, new
technology and special material. Its efficiency reaches the level 2 of efficiency standard GB18613-
2012 and level 3 of standards IEC60034-30 (2008).
Model instruction:
YE3 — 132 S2 — 2 H
Condition code: Marine motor
Pole
Length of stator (the second corn length in the short frame)
Shaft height
Three phase induction motor series
1. Circumstance of use
1.1 Applicable: On weather deck or similar condition where the ambient temperature is
-25
℃
~+45
℃
; the application altitude not exceed 1000m..
1.2 The initial cooling water temperature shall be no higher than +32
℃
.
1.3 Relative humidity of wet month shall be no higher than 95%, and condensation is allowable.
1.4 Inclination and rocking: trimming 5°(emergency motor 10°) ; pitching 10°(emergency motor
10°); heeling 15°(emergency motor 22.5°); rolling 22.5.
1.5 The motor can be applied in the circumstance where contains inflammable gases, and harmful
gases or steam (except for the special purpose motor).
1.6 Motor can be started at full voltage or reduced voltage. Starting current is 3.3-8.0 times rated
current if it starts with full voltage. As torque is proportional to voltage square, the torque will be
reduced when the motor is started at reduced voltage. So if the static load is fairly large, the motor can
be only started with full voltage.
1.7 Keep the motor clean and in good ventilation.
1.8 There are two kinds of connections of the motor. Motor less than 4kw is of Y connection, 4kw
and above are
△
connection. Ensure that all the terminals are connected as the diagram.
·Please read the manual carefully before use
·Please keep it properly