31 / 38
User Manual
□
Normal
□
Internal Use
Confidential
□
Restricted Confidential
8. Safety Recommendation
Be sure the use of this product is allowed in the country and in the environment required.
The use of this product may be dangerous and must be avoided in the following areas:
Where it can interfere with other electronic devices in environments such as
hospitals, airports, and aircraft
Where there is a risk of explosion such as gasoline stations and oil refineries
It is the responsibility of the user to comply with his or her country’s regulations and any
specific environmental regulations.
Do not disassemble the product; any mark of tampering will compromise the warranty’s
validity.
We recommend following the instructions of the hardware user guides to correctly wire the
product. The product must be supplied with a stabilized voltage source, and the wiring must
conform to all relevant security and fire-prevention regulations.
This product must be handled with care; avoid any contact with the pins because
electrostatic discharge may damage the product. The same caution must be taken regarding
the UIM card; carefully check the instructions for its use. Do not insert or remove the UIM
when the product is in power-saving mode.
The system integrator is responsible for the functioning of the final product; therefore, care
must be taken for external components of the module as well as for project or installation
issues—there may be a risk of disturbing the GSM network or external devices or of having
an impact on device security. If you have any doubts, please refer to the technical
documentation and the relevant regulations in force.
Every module must be equipped with a proper antenna with specific characteristics. The
antenna must be installed with care in order to avoid any interference with other electronic
devices.
