Product User Manual
□ Normal □ Internal Use
Confidential □ Restricted Confidential
4 / 36
Important Notice to OEM integrators
1. This module is limited to OEM installation ONLY.
2. This module is limited to installation in mobile or fixed applications, according to Part
2.1091(b).
3. The separate approval is required for all other operating configurations, including portable
configurations with respect to Part 2.1093 and different antenna configurations
4. For FCC Part 15.31 (h) and (k): The host manufacturer is responsible for additional testing to
verify compliance as a composite system. When testing the host device for compliance with Part
15 Subpart B, the host manufacturer is required to show compliance with Part 15 Subpart B while
the transmitter module(s) are installed and operating. The modules should be transmitting and the
evaluation should confirm that the module's intentional emissions are compliant (i.e. fundamental
and out of band emissions). The host manufacturer must verify that there are no additional
unintentional emissions other than what is permitted in Part 15 Subpart B or emissions are
complaint with the transmitter(s) rule(s).
End Product Labeling
When the module is installed in the host device, the FCC ID label must be visible through a
window on the final device or it must be visible when an access panel, door or cover is easily re-
moved. If not, a second label must be placed on the outside of the final device that contains the
following text: “Contains FCC ID: NKRIMA2”
“Contains IC: 4441A-IMA2“
The grantee's FCC ID/IC ID can be used only when all FCC/IC compliance requirements are met.
Antenna Installation
(1) The antenna must be installed such that 20 cm is maintained between the antenna and users,
(2) The transmitter module may not be co-located with any other transmitter or antenna.
(3) To comply with FCC/IC regulations limiting both maximum RF output power and human
exposure to RF radiation, the maximum antenna gain including cable loss in a mobile exposure
condition must not exceed:
Standalone Condition:
。
10.0 dBi in PCS band
。
7.0 dBi in AWS band
。
7.5 dBi in 700 MHz Band
Assuming collocated with an ordinary WLAN transmitter with 5 dBi antenna gain
。
7.0 dBi in PCS band
。
6.5 dBi in AWS band
。
4.0 dBi in 700 MHz Band
In the event that these conditions cannot be met (for example certain laptop configurations or co-
