WMS Bluebird Series Service Manual & User Manual Download

Page: 67 / 116

4-5

Diagnostic Tools

16-020834-00

Diagnostic
Tools

CPU-NXT™ includes diagnostic tools to test game components and verify functionality. Some of the
components that are tested using the

Administration Menu

include:

Compact Flash

EEPROMS

Bill Acceptor

Coin Acceptor

Hopper

Printer

Reference the following sections for detailed steps on troubleshooting these components.

Cash Devices

Diagnostics

The

Diagnostics Menu

Figure 4-1

, includes an added

Cash Devices

option, which allows you to

perform the following tests:

Bill Validator Test (for tickets and vouchers)

Coin Acceptor Test (counting coins sent to either the Hopper or Drop)

Hopper Tests (1-coin or 10-coin test, with counter displayed)

Printer Test (printing a void ticket)

NOTE:

Before initiating any Cash Devices tests, ensure that the devices are correctly set. To set

the device, select Device Setup from the Machine Setup screen,

Figure 4-1

Figure 4-1 Diagnostics Menu.

Summary of Contents for Bluebird Series





















































































































Search results

Summary of Contents for Bluebird Series

Reviews:

Related manuals for Bluebird Series

Brands by name

Popular brands

WMS Bluebird Series, Service Manual & User Manual

Search results

Summary of Contents for Bluebird Series

Reviews:

Related manuals for Bluebird Series

Brands by name

Popular brands