WMF Series 8400 bistro User Manual Download | Manualshive

Page: 64 / 72

background image

64

User manual WMF bistro!

Appendix: Technical data

conditions for usage and installation

Necessary preparatory work for electricity , water and
drainage connections at the customer‘s premises are to
be arranged by the machine owner / operator. The work
must be carried out by authorised installation technicians
in compliance with general, country-specific and local
regulations. The WMF Service technicians may only
connect the machine to existing prepared connection
points. The WMF Service technicians are neither
authorised nor responsible for carrying out any work prior
to connection.

Water supply

3/8 inch hose connector with main valve, and filter with 0.2 to
0.25 mm mesh size, on site.
Min. of a 29 psi (0.2 MPa) flow pressure at 2 l/min., max. 87 psi
(0.6 MPa.)
Water temperature max. 95 °F (35 °C).
Use the hose supplied with the new coffee machine and/or new
water filter. Do not use old hoses.

Water quality

For drinking water with a carbonate hardness above 5 gpg
(5 °dKH), a WMF scale filter should be installed upstream.

Water drain pipe
(optional)

Hose a min. DN 19, minimum downward slope of 0,02 inch/inch
(2 cm/m)

Ambient temperature

+ 41 °F (+ 5 °C) to max. of + 95 °F (+ 35 °C)
(empty the water line in case of frost).

Maximum humidity

80% relative humidity without condensation.
Do not use unit outdoors.

Degree of protection

IP X0

Installation surface

The unit must be placed on a level, flat, and sturdy surface.
The unit is not intended to be located on a surface that is
sprayed or cleaned with a water hose, steam jets, steam cleaner,
or similar devices.

Inbuilt clearances

For operating, service and safety reasons the machine should
be installed with a clearance of not less than 2 inch (50 mm) at
the back and sides from the building or non-WMF components.
A clear height of 44 inch (1100 mm) from the top of the
supporting surface should be ensured. The height of the instal-
lation surface above the floor is at least 34 inch (850 mm). If
the machine connections should be passed downwards through
the counter please make space for the lines which can reduce
the usable space below the machine.

Installation dimensions
of the scale filter

See the user manual for the scale filter.

NoticE

The equipment is to be
installed to comply with
applicable federal, state or
local plumbing codes.
This includes adequate
backflow protection.

«
...
62
63
64
65
66
...
»

Summary of Contents for Series 8400 bistro









































































Reviews:

No comments

Related manuals for Series 8400 bistro

Brand: Panasonic Pages: 44

Brand: Stilevs Pages: 20

Brand: Hamilton Beach Pages: 20

Brand: La Pavoni Pages: 9

Brand: TREVIDEA Pages: 28

Brand: Caffitaly System Pages: 100

Brand: Gaggia Pages: 92

Brand: UBI Pages: 6

Brand: Faema Pages: 50

NAVIGLIO HD8749/01

Brand: Gaggia Pages: 48

E98/A-2 Compact

Brand: Faema Pages: 44

Brand: Jenn-Air Pages: 42

Brand: Princess Pages: 16

Brand: Saeco Pages: 88

Brand: FAP Pages: 25

Brand: Summerset Pages: 15

Brand: GEAppliances Pages: 20

Brand: West Bend Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands