WMF Series 8400 bistro User Manual Download

Page: 46 / 72

User manual WMF bistro!

Care

5.5

choc mixer cleaning (optional)

Cleaning will be more / less frequent depending on the
powder used.

Switch off espresso machine using the ON / OFF button

Pull out mains plug

Remove the coffee grounds container

Pull off mixer hose from mixer to c

ombi spout

Turn stud on bayonet fitting underneath the mixer jug

counter-clockwise

The mixer jug is released from the arrester lock.

The propeller for the mixer is now visible and can be

cleaned with a cloth
Dismantle two-piece mixer jug

Clean both parts of mixer jug and mixer hosing under

warm running water
Allow all parts to dry completely

On re-assembly all openings must face in the same
direction.
Ensure that the spiral guide is plugged on and the hose is
not pinched.

Replace mixer jug

Turn stud on bayonet fixing back in a clockwise

direction
Push mixer hose onto mixer jug fitting again and plug in

combi spout
Replace the coffee grounds container

Ensure that mixer hose is replaced securely.
This is important as otherwise, during the next dispensing,
hot water or hot Choc may escape.

closed

open

caUtioN

Scald hazard.
Hot liquids.

Ensure mixer hose is
replaced securely.

Summary of Contents for Series 8400 bistro









































































Search results

Summary of Contents for Series 8400 bistro

Reviews:

Related manuals for Series 8400 bistro

Brands by name

Popular brands

WMF Series 8400 bistro, User Manual

Search results

Summary of Contents for Series 8400 bistro

Reviews:

Related manuals for Series 8400 bistro

Brands by name

Popular brands