54
User Manual WMF espresso
Software | System
Cup heating
The cup heater is switched on and off here.
Options:
• active
• inactive
Default value:
active
Touch display calibration
The touchscreen can be recalibrated here.
When selected, it asks whether the calibration should
be started.
Water filter
Options:
• active
• inactive
Default value:
inactive
If active
Water filter is fitted. Capacity and
water hardness are queried.
Eco mode
If Eco mode is set to active, the steam boiler
temperature is reduced 10 minutes after the last
beverage is dispensed.
The optional cup table and rear cover illumination is
switched off.
If a beverage is to be dispensed when the temperature
has fallen, the coffee machine needs up to 15 seconds
to heat up.
Beverage dispensing is not possible until it has
heated up.
Eco mode
The Eco mode can be activated here.
Options:
• active
• inactive
Default value:
inactive
Instructions
We recommend using a water filter.
Your WMF service partner will be
happy to advise you on the right
water filter to use.
