28
User Manual WMF espresso
Operation | Steam options
3.8 Steam options
Burn hazard / scalding hazard
• When using Auto Steam, Basic Steam, and
SteamJet, hot steam comes out of the steam
openings. The adjacent surfaces and spouts
become hot.
• Hot water and steam may escape from the
outlets in the heating-up phase.
> When dispensing beverages and steam, do not
reach beneath the spouts.
> Do not reach beneath the spouts during the
heating-up phase.
> Do not touch the spouts immediately after
dispensing.
> Always place an appropriate cup under the
spout before dispensing a beverage.
Burn hazard / scalding hazard
• Milk and foam can boil over if the
temperature is set to 90 °C.
> Fill jug to no more than half way.
> Do not overheat milk when foaming,
otherwise milk foam volume decreases.
The standard version of the coffee machine is equipped
with Auto Steam, Basic Steam, and SteamJet.
It is not possible to dispense steam from the
Auto Steam and the Basic Steam at the same time.
CAUTION
CAUTION
TIP