83
User Manual WMF 1500 S
Care | Manual cleaning
Allow the bean hoppers to dry completely
Refill and replace bean hoppers
Use the multitool to rotate the lock clockwise
to close it
6.5.11 Clean the powder hopper
Cleaning will be more frequent depending on powder
consumption.
Slide the operating panel upward
The ON/OFF switch is on the right side, behind the
operating panel.
Press the ON/OFF switch until coffee machine
switches off
Disconnect mains plug
Use the multitool to turn the lock on the powder
hopper counterclockwise to open it
Tip hopper backwards and remove upwards
Empty hopper completely
Unscrew union nut at front and rear
Remove the dosing auger
Thoroughly wipe out hopper with a damp cloth
Thoroughly clean individual dosing auger
components
Allow powder hopper and individual components
to dry completely
Re-assemble and replace the dosing auger and
screw on union nuts
ensure correct orientation of discharge.
Refill and replace powder hopper
Use the multitool to rotate the lock clockwise
to close it
Portion controller with individual
parts. Dosing auger
iMportant