WMF 1300 S User Manual Download Page 96

Page: 96 / 136

User Manual WMF 1300 S

Care | Manual cleaning

7.5 Manual cleaning

7.5.1 Clean the operating panel (CleanLock)

Touch

CleanLock

A 15-second countdown starts.

The touch display can now be cleaned.
The touch display is activated again 15 seconds after
the last time it was touched.

Scalding hazard

• If a beverage is initiated accidentally, there is

a hazard of being injured.

> Always lock out the touch display with

“CleanLock” before cleaning.

• There is a risk of causing scratches or scoring.
> Clean the display with a clean, damp cloth.

Do not use any cleaners or implements.

> Use soft cloths for cleaning.
> We recommend a damp microfiber cloth.

7.5.2 Clean the grounds container

(grounds chute, optional)

Empty grounds container and rinse under running
drinking water

Clean with a clean, damp cloth

Dry the grounds container and replace it

> On coffee machines with grounds disposal

through the counter, the grounds chute must
be cleaned daily.

> Never use force. Danger of breakage.

Order numbers for the WMF care
program

Accessories and spare parts

page 129

CAUTION

Follow the Safety chapter

starting on page 5

IMPORTANT

Follow the Warranty chapter

starting on page 124

IMPORTANT

Follow the Warranty chapter

starting on page 124

Summary of Contents for 1300 S









































































































































Search results

Summary of Contents for 1300 S

Reviews:

Related manuals for 1300 S

Brands by name

Popular brands

WMF 1300 S, User Manual

Search results

Summary of Contents for 1300 S

Reviews:

Related manuals for 1300 S

Brands by name

Popular brands