4
The Basic Operation
● Insert the IDE or SATA to the hard disk seat.
● Insert the IDE or SATA to the hard disk seat. Insert the DC / 12V power to the hard disk seat,
turn on the power switch, the power indicator light show blue, confirmation the hard disk
whether working or not.
● Connect the hard disk base and
the computer with the USB line.
Open my computer can see the
letter, when reading dish, it can
show the red signal lamp. (if this is a new hard drive, you ought to do as follows: right key in
my computer / management / disk management, which can operation of partition and
format. )
● Push the one backup button can working of OTB. (Referred one-touch backup manual).
Packing List
1. One set of H5 host.
2. One piece of CD.
3. One cable of USB.
4. One power adapter (12V/2A).
5. Operation and OTB usage Manuals.
