1. Power switch
2. Power LED
3. Throttle trigger
4. Steering wheel
5. Throttle trim
6. Steering trim
7. Antenna
Insert the battery by sliding the cover down. Insert 4 x AA
batteries as indicated under the cover.
Remote control/ transmitter
1. For your first time sailing make sure to be with an experienced person in operating RC boats. We advise to make your first sail
in an open environment, away from any obstacles.
2. Find a location away from people and animals, with calm water and without obstacles.
3. Make sure that you do not sail toward any moving vehicles or any other water traffc.
4. Swith on the RC boat and place it in the water,about 10 feet away from you. It is advised to place the boat with facing away
from you. this will make it easier to control.
5. Switch on the remote control. A beeping sound will indicate that the remote is switched on. Be aware that the boat has a water
sensor and therefore will not move its blade until placed in water.
6. Gently use the throttle trigger to make the boat move. You can look if the boat has any deviation. If so, you can adjust the
steering using the steering trim.
- To turn on the remote control press the power switch (1). The power LED will light up, indicating that the remote controller is
switched on.
- Acceleration and reverse can be controlled by the throttle trigger (3). Pull it backwards to accelerate forwards and push it
forwards to reverse.
- Steering left and right can be controlled by the steering wheel (4).
- If the boat has a deviation to the left or right side you can use the steering trim (6) to adjust this deviation.
- If the boat slowly accelarates while not using the throttle you can use the throttle trim (5) to adjust this deviation.
How to use
First time sailing
Copyright WLtoys.eu | DroneX BV
