Steps to install the FPV set on your copter:
1. screw the antenna (1) on the FPV monitor (2)
2. Install the sun block cover (3) on the FPV monitor for better
visibility during sharp sunlight.
3. Mount the FPV monitor (2) on remote (5) by using the FPV
mount bracket (4) and screw set.
4. Turn the monitor on on the right side and then the camera
which is mounted to the copter. Make sure the Antenna of the
camera is extended and connect the camera to the FPV socket
of the copter.
12. Elevator trim
Steering with the phone:
- Toggle button 6 to on. This enables on screen steering like standard remote
Application
2. Make video (saved to camera roll)
3. Go to media library
6. Eneble/disable steering on phone
7. Rotate image
8. Throttle/rudder
9. Elevator/aileron
11. Aileron trim
- Download the app with the QR code which is inside the box
WIFI
1. Take picture (saved to camera roll)
- Connect the battery of the V686
- Start the app and press play
This model comes with a Wifi camera module.
10. Rudder trim
4. Adjust assertiveness (30/60/100%)
- Toggle gyro symbol (button 5) on to steer with mobile device gyroscope. Throttle is always on screen
With the aplication on android and iOS you are able to fly your drone, and fly with FPV (First Person View). Your smartphone can
Connecting the V686K:
- Either steer the quad with the remote or with the phone
5. Steer by gyroscope
- On the mobile device look for the Wifi network starting with LG. Connect
Copyright WLtoys.eu | DroneX BV
