1. LED
2. Li-po Battery
Plug the charger into a wall socket and connect the battery to
the charger. This can only be done in one way: by firmly
connecting the charging cable. If the green light is on, the
battery is fully charged and can be disconnected. Then do not
forget to unplug the charger from the wall socket.
Green LED ON = charging battery
Green LED OFF = charged battery
Green LED flashing = damaged battery
Red LED ON = charger
Red LED OFF = damaged charger / not connected to a wall
socket
Input : 220V
Charging Current : 500mA
Full Voltage: 4.2 +/- 0.03V
1. Antenna
2. Camera
3. Direction control stick
4. Yaw trim
5. Aileron trim
6. LCD Display
7. Power switch
8. Rotation trim
9. Speed trim
10. Throttle control stick
11. Modes
12. Power LED
1. Battery indicator
2. Modes
3. Yaw trim
4. Aileron trim
5. Rotation trim
6. Speed trim
7. Throttle output
Remote Control / Transmitter
Copyright WLtoys.eu | DroneX BV
