Option A : Via the remote wire (V252/V939/V911)
1. Wire
2. Support
3. LED
4. Batteries
Unplug the connector from the remote and put it into the
charging station. Switch on the remote and put one or both
batterie(s) in the charging station. The light of the charging
station will be red. After one hour the light will turn off meaning
that the battery is fully charged.
Option B : Via USB
Connect the USB plug of the charging station with a computer
or other electronic device. As soon as the charging station is
connected you will see a red light. After one hour the light will
turn off meaning that the battery is fully charged.
Please disconnect the charging station as soon as the red light
of the charging station is off.
1. Antenna
2. Camera
3. Direction control stick
4. Yaw trim
5. Aileron trim
6. LCD Display
7. Power switch
8. Rotation trim
9. Speed trim
10. Throttle control stick
11. Modes
12. Power LED
1. Battery indicator
2. Modes
3. Yaw trim
4. Aileron trim
5. Rotation trim
6. Speed trim
7. Throttle output
Remote Control / Transmitter
Copyright WLtoys.eu | DroneX BV
