WLINK WL-G520 Series User Manual Download Page 5

Page: 5 / 81

WL-G520 Series Router User Manual

Hardware Installation

This chapter is mainly for installation introduction, there would be some difference between the scheme
and real object. But the difference won’t have any influence to products performance.

1.1

Panel

Table 1-1

WL-G520 Structure

WLINK Tech.

G520 series

Front

Rear

There are some difference on Antenna interface and indicator light for the device with extended
Wi-Fi, GPS features.

Table 1-2

Router Interface

Port

Instruction

Remark

USIM

Plug type SIM Slot, support 1.8/3V/5V automatic

detection.

LTE antenna, SMA connector, 50Ω.

GPS

LTE MIMO antenna/GPS optional

Wi-Fi1

Wi-Fi dual-band antenna, RP-SMA connector

Wi-Fi2

Wi-Fi dual-band antenna, RP-SMA connector

LAN1~LAN4 100/1000Base-TX

，

MDI/MDIX self-adaption.

Summary of Contents for WL-G520 Series


















































































Search results

Summary of Contents for WL-G520 Series

Reviews:

Related manuals for WL-G520 Series

Brands by name

Popular brands

WLINK WL-G520 Series, User Manual

Search results

Summary of Contents for WL-G520 Series

Reviews:

Related manuals for WL-G520 Series

Brands by name

Popular brands