Industrial Cellular Gigabit Router User Manual
www.wlink-tech.com
14
Figure 3-1
Cellular Settings GUI
Table 3-1
Cellular Setting Parameter Instruction
Parameter
Instruction
ICMP check
To enable or disable ICMP check rules. Enable the ICMP check
and setup a reachable IP address as destination IP. Once
ICMP check failed, router will reconnect/reboot system as
optional.
Cellular Traffic Check
There is Rx/Tx as options. Once no Rx/Tx data, router will
router will reconnect/reboot system as options.
CIMI Send
Send CIMI to defined IP and port by TCP protocol.
SMS Code
Remotely control router by SMS. Router just identify the correct
SMS code as configured.
Pin Code
Some SIM cards are locked with a Personal Identification
Number (PIN) code to prevent misuse if they are lost or stolen.
Operator Lock
Lock router for a specified operator via MCC/MNC code.
Connect Mode
Auto.Router will automatically connect 3G/4G network and
keep 4G in prior.
LTE. Router will connect 4G only.
3G. Router will connect 3G only.
APN
A
PN, provided by local ISP, usually CDMA/EVDO network do
not need this parameter.
User
SIM card user name is provided by ISP
Password
SIM card password is provided by ISP
Auth Type
Support PAP/Chap/MS-Chap/MS-Chapv2
Local IP Add
Assigned SIM IP from operator.
【
ICMP Check
】
Enable ICMP, Router will automatically check whether the defined IP address is
reachable per 60s. If the IP address is unreachable and ICMP check is timeout at
the first time, it will check 2 times every 3 seconds. If the third time is still failed, the
router will redial.
The ICMP Check IP is a public IP or company server IP address.