BEFORE PROCEEDING, CAREFULLY READ ALL OF THE IMPORTANT SAFETY INFORMATION
CONTAINED IN THIS OWNER’S MANUAL, INCLUDING:
A.
Pre-Installation and Outdoor Campfire Preparation Safety Guidelines (page 3).
B.
Log installation Guidelines (page 4).
C.
Minimum Clearance to Combustibles (page 2).
BEFORE INSTALLATION, BE SURE THE PROPANE TANK IS TURNED OFF.
To connect to the propane gas tank, attach the black hose (with regulator) and tighten down the connector. Follow all
instructions and safety warnings supplied with the propane tank.
Turn on the gas to the burner system and test for leaks with soapy water solution.
(Never use an open flame for testing). If a leak is found, tighten the connector until no leaks are detected.
The hose should be inspected before each use of the appliance.
The hose assembly must be replaced prior to the appliance being put into operation if there is evidence of excessive
abrasion or wear, or if the hose is damaged. The replacement hose shall be that specified by the manufacturer.
Properly locate the gas hose out of pathways where people may trip over it or in areas where the hose may be subject to
accidental damage.
A. Carefully inspect the burner and log cartons for shipping damage. If any parts are missing or damaged, call your
dealer.
Do not attempt
to install the appliance unless all parts are in good condition.
B. Correct installation is crucial to safe performance of your Outdoor Campfire.
C. Due to high temperatures, the Campfire must be located out of traffic areas and away from combustibles.
LOG INSTALLATION GUIDELINES
INSTALLATION INFORMATION
CONNECTING THE GAS TO THE CAMPFIRE
I M P O R T A N T
LAVA GRANULES & LOG PARTS LIST
4
#1 #4
#2 #5
#3 #6
#7
#8
Replacement parts available from your local retailer.
