45
VoIP
Network
Services
GmbH,
Justus
‐
von
‐
Liebig
‐
Str.
26,
31535
Neustadt
Field
Name
Description
Provision Enable
If or not enable provision.
Resync on Reset
If or not enable resync after DIV378 restart
Resync Random Delay (sec)
Set the maximum delay for request the synchronization file,
default
is
40.
Resync Periodic (sec)
If the last resync was failure, WB100A will retry resync after
the “Resync Error Retry Delay ” time, default is 3600s.
Resync Error Retry Delay (rec)
Set the periodic time for resync, default is 3600s.
Forced Resync Delay (sec)
If it’s time to resync, but WB100A is busy now, in this case,
WB100A will wait for a period time, the longest is “Forced
Resync Delay”, default is 14400s, when the time over,
WB100A
will
forced
to
resync.
Resync After Upgrade
If or not enable firmware upgrade after resync, by default it
is
enabled.
Resync From SIP
If or not enable resync from SIP.
Option 66
It is used for In-house provision mode only. When use
TFTP
with
option
66
to
realize provisioning, user must input
right configuration file name in IP542N's webpage. When
disable
Option 66
, this parameter has no effect.
Config File Name
It is used for In-house provision mode only. When use
TFTP
with
option
66
to
realize provisioning, user must input
right configuration file name in IP542N's webpage. When
disable
Option 66
, this parameter has no effect.
Profile
Rule
URL of profile provision file
Note
that
the
specified
file path is relative to the TFTP
server’s
virtual
root
directory.
