286-343
P 2008 © Firma WJG, Braunschweig. Nachdruck oder Vervielfältigung nur mit ausdrücklicher Genehmigung
-
Pull the accumulator from the helicopter after you removed the cockpit and unscrewed the
battery case.
-
Connect the accumulator with the charger and this one with an electric outlet.
-
The charging time is maximal 2.5 h.
-
That followed replace the accumulator in the shaft connect it to the cable and fasten the battery
case with the screws.
-
Then attach the cockpit to the helicopter again.
-
Use its switch to turn on the helicopter itself. If its light flashes constantly then it is ready for
use. It is a sign that the accumulator is discharged when the flashing slows down.
-
The accumulator should fully recharge at least once every three months to avoid depth
discharge and loss of power.
Operation of the Helicopter with the Help of the Remote Control.
•
Switch on the remote control first followed by the helicopter itself.
•
Press the throttle stick upwards and the main rotor will start to move. It is getting faster and faster until
the helicopter will ascend.
•
Now press the throttle down and the main rotor will get slower. The helicopter will decline.
•
To let the chopper land smoothly, press the throttle stick down slowly.
•
If the servo is not working properly then adjust the potentiometer beside the throttle control stick.
•
Press the rudder control stick to the left and the tail rotor will start moving slowly. The helicopter will
pitch to the left then.
•
Press the rudder control stick to the right and the tail rotor will move faster. The helicopter will pitch to
the right then.
•
If the chopper turns around its own axis without any influence of the direction control stick then you
have to adjust the potentiometer. You must use the potentiometer under the “fly adjuster” on the
remote control. Set the potentiometer until the helicopter stops the unwanted turning.
•
To move the helicopter forward or backward press the elevator control stick up or down.
•
To let the helicopter turn to the left or to the right press the aileron control stick to the left or to the
right.
