Wiznet WIZ630wi, User Manual

Page: 35 / 64

© Copyright 2012 WIZnet Co., Inc. All rights reserved.
35
6.3
Packing Condition
Packing Condition Packing Condition
Packing Condition (Incoming serial data packing condition)
(Incoming serial data packing condition) (Incoming serial data packing condition)
(Incoming serial data packing condition)
Type
Type Type
Type Description
Description Description
Description
Time Time Time Time
Data packing until the set time and then sent to server after the set time.
Size Size Size Size Data packing until the set size and then sent to the server.
Character
Character Character
Character
Data packing until the set character and then sent to the server.
Inactivity Time: Inactivity Time: Inactivity Time: Inactivity Time:
TCP/IP connection is discontinued if there is neither serial data nor network
data during the set time.
H/W CMD switch
H/W CMD switch H/W CMD switch
H/W CMD switch
-. Enable/Disable the H/W CMD switch pin.
-. H/W CMD switch pin is the switch for sending commands from CPU to
WIZ630wi.
6.4 6.4 6.4 6.4 Ethernet Data Tagging Option Ethernet Data Tagging Option Ethernet Data Tagging Option Ethernet Data Tagging Option
This option is used to help serial device to identify who is the received serial data’s source: the received
serial data comes from Main Port or Aux Port.
Type Type Type Type Description Description Description Description
Status
Status Status
Status
Enable or disable this option (Checked : Enable, Un-Check : Disable)
Main Port Main Port Main Port Main Port
Before sending data from Main port to serial port, WIZ630wi added a TAG in
the front of payload.
For example:
In-come LAN Data : “abcdegf”
Output data to Serial Port : “!MAIN!abcdegf”
Aux Port
Aux Port Aux Port
Aux Port
Before sending data from Aux port to serial port, WIZ630wi added a TAG in the
front of payload.
For example:
In-come LAN Data : “abcdegf”
Output data to Serial Port : “!AUX!abcdegf”